坚固的金属外壳

ucs传感器坚固的金属外壳与工业标准的光电传感器相互兼容。

可以旋转的接插件

可以灵活的选择安装位置并使接线更加灵活。

ucs 传感器

2个推挽式开关量输出，可选在带有IO-link接口的pnp或者npn电路中

By default, switching output F1 works antivalent to switching output F2. Using LinkControl or IO-Link, the antivalence of switching output F1 can be canceled.

自学习按钮

传感器顶部的自学习按钮，使得对所需的检测点和工作模式的设置变得非常方便。

一个双重LED灯

显示两个开关量输出的开关状态。

New! With the internal alignment assistance

the sensor can be optimally aligned to the object during installation.

ucs sensor using alignment assistance

ucs 传感器

有三种工作模式：

• 单开关点模式
• 窗口模式
• 反射板式

开关量输出的设置通过如下步骤：

将传感器放置在想要的检测距离处，使其被检测到。按下按钮大约3秒，再次按下按钮大约1秒，设置完毕。窗口模式和反射板模式也可以用同样简单的方法设置。.

Teach-in of a switching point

A two-way reflective barrier

can be set up with the help of a permanently mounted reflector by mounting the ucs sensor and the reflector, then pressing the button for approx. 3 seconds and then pressing it once more for approx. 10 seconds. Now, the two-way reflective barrier has been set.

Teach-in of a two-way reflective barrier

Set a window

by initially positioning the object to be detected on the sensor-close window limit (1), pressing the button for approx. 3 seconds, shifting the object to the sensor-distant window limit (2) and pressing the button once more for approx. 1 second. Ready.

Teach-in of a window with two switching points

Up to ten sensors

can be synchronised with one another. To do this, all the sensors are electrically connected on pin 5 on the M12 circular connector.

Synchronisation using pin 5

If more than 10 sensors must be synchronised, this can be carried out with the SyncBox1, which is available as an accessory.

LinkControl

optionally permits the extensive parameterisation of ucs sensors. The LCA-2 LinkControl adapter, which is available as an accessory, can be used to connect ucs sensors to the PC.

Sensor connected to the PC via LCA-2 for programming

集成IO-Link

在1.1.2版中，lpc+传感器配备了智能传感器配置文件，从而使得IO-link设备之间的通讯更简便。