• archivsensoren_1046x850.jpg

Back

archiv sensor  dbk-4/Empf/BEE/ KU0,6

  • dbk-4/Empf/BEE/ KU0,6
  • pin assignment

Page content as online catalogue (download)

Download complete sensor range as PDF

please ask about
  • 2 x npn
papers with weights of 20 - 1,200 g/m2, metal-laminated sheets and films up to 0.4 mm thick, self-adhesive films, sheet metals up to 0.3 mm thick, fine corrugated card
special design
double sheet control
receiver for ultrasonic double sheet control
swapped-out ultrasonic transducer
special design
pulse operation with amplitude evaluation
400 kHz
7 mm in front of transmitter and receiver
20 - 30 V d.c., reverse polarity protection
± 10 %
≤ 45 mA
2 m PVC cable, 5 x 0.25 mm2
1 m PVC cable with 2-pin plug IP 20 to the transmitter, 0.6 m PV cable to the swapped out receiver
double sheet output
npn: Imax = 500 mA (-UB+2V)
NOC, short-circuit-proof
missing sheet output
npn: Imax = 500 mA (-UB+2V)
NCC, short-circuit-proof
0.5 ms in trigger mode
only trigger mode:
A measurement is carried out given a falling edge at the control input (edge change from +UB to -UB, pulse width ≥ 1 ms). After a 0.5 ms response time, both outputs are set in accordance with the reading. The states of the two control outputs are frozen until the next falling edge.
control input
40 mm ± 3 mm
± 45° from the perpendicular to the sheet
brass sleeve, nickel-plated, plastic parts, PBT
polyurethane foam, epoxy resin with glass contents
15 Nm
IP 65
+5°C to +60°C
-40°C to +85°C
190 g
not necessary
not necessary
1 x Duo-LED; green: working / red: double sheet / flashing red: missing sheet
receiver for ultrasonic double sheet control
swapped-out ultrasonic transducer
special design
dbk-4/Empf/BEE/ KU0,6