• archivsensoren_1046x850.jpg

Back

archiv sensor  wms-4/4I II PH8

  • wms-4/4I II PH8

Page content as online catalogue (download)

Download complete sensor range as PDF

please ask about
  • 4 x analogue 4-20 mA
cuboidal
evaluator
release delay 1 s
echo propagation time measurement
0.36 mm
± 0.15 % in scan (multiplex) mode, ± 0.45 % in synchronous mode
temperature drift 0.17 %/K
20 - 30 V d.c., reverse polarity protection
± 10 %
≤ 50 mA (without sensors)
screw terminals, wire cross-section 1.5 mm2
analogue output
current: 4-20 mA
switchable rising/falling
analogue output
current: 4-20 mA
switchable rising/falling
analogue output
current: 4-20 mA
switchable rising/falling
analogue output
current: 4-20 mA
switchable rising/falling
By means of a 0...20 mA signal at the control input (shift), the set analogue windows can be moved at the same time.
control input
plastic with 24 screw terminals, suitable for top-hat rail mounting to DIN EN 50022-35
polyurethane foam, epoxy resin with glass contents
IP 20
-20°C to +70°C non-condensing
-40°C to +85°C
200 g
durch Ulraschall-Referenzmessung
3 push-buttons, 1 slider switch on front
at the evaluator
yes
yes
4 x LED yellow: object in the window, 8 x LED green: status and programming
release delay 1 s
BA_ENG_wms-4_4I.pdf
CE_CON_ENG_wms-4.pdf
wms-4/4I II PH8