wms-4/4I | ultrasonic sensor

replaced byplease ask about

designcuboidal

operating modeevaluator

particularitiesarchive sensor

means of measurementecho propagation time measurement

resolution0.36 mm

reproducibility± 0.15 % in scan (multiplex) mode, ± 0.45 % in synchronous mode

accuracytemperature drift 0.17 %/K

electrical data

operating voltage U_B20 - 30 V d.c., reverse polarity protection

voltage ripple± 10 %

no-load current consumption≤ 50 mA (without sensors)

type of connectionscrew terminals, wire cross-section 1.5 mm²

outputs

output 1analogue output
current: 4-20 mA
switchable rising/falling

output 2analogue output
current: 4-20 mA
switchable rising/falling

output 3analogue output
current: 4-20 mA
switchable rising/falling

output 4analogue output
current: 4-20 mA
switchable rising/falling

inputs

descriptionBy means of a 0...20 mA signal at the control input (shift), the set analogue windows can be moved at the same time.

input 1control input

IO-Link

housing

materialplastic with 24 screw terminals, suitable for top-hat rail mounting to DIN EN 50022-35

ultrasonic transducerpolyurethane foam, epoxy resin with glass contents

class of protection to EN 60529IP 20

operating temperature-20°C to +70°C non-condensing

storage temperature-40°C to +85°C

weight200 g

temperature compensationdurch Ulraschall-Referenzmessung

controls3 push-buttons, 1 slider switch on front

scope for settingsat the evaluator

Synchronisationyes

multiplexyes

indicators4 x LED yellow: object in the window, 8 x LED green: status and programming

particularitiesarchive sensor

accessories

EU-Declaration of conformityCE_CON_ENG_wms-4.pdf

order no.wms-4/4I

archiv sensor wms-4/4I